Skip to the swatches
Own

Sample No. 0244

Shellac Wood Finish: Mixing a 1-Pound Cut and Choosing Brushes

Woodworking & Carving The Lost Scrolls of Handwork

Learn why this woodworker favors shellac, how he mixes a 1-pound cut, which alcohols work, and when he reaches for squirrel or goat hair brushes.

Shellac Wood Finish: Mixing a 1-Pound Cut and Choosing Brushes

Fast drying, a clear appearance and a long history on furniture make shellac this woodworker’s preferred finish for a bookshelf. His approach centers on a forgiving 1-pound cut, carefully chosen alcohol and brushes suited to the size of the piece. The method is simple, but the mix depends on keeping water out and matching the cut to the way you apply it.

Why he chooses shellac

Shellac comes from resin produced by lac insects that live on trees. People have harvested it for about 5,000 years, though the resin has existed far longer. The author estimates that producing one kilogram involves approximately 300,000 insects, with the exact number varying. Harvesting also costs some insects their lives. Breeding reserves and managed host trees help maintain a continuing supply.

For furniture, the author values shellac’s quick drying time: several coats can go on in a day. He also describes it as stable, attractive and available in grades that can be exceptionally clear. In his experience, shellac can remain on furniture for hundreds of years, and it doesn’t yellow in the same way many other finishes do.

His comparison comes from a small box he finished with Minwax Antique Oil, an oil-based wiping finish containing resins and solvents. After two years, the finish seemed to have disappeared, though the box had remained untouched in his parents’ display cabinet. That experience strengthened his preference for shellac. It’s a personal account rather than a controlled comparison, but it explains why he keeps returning to this traditional finish.

Choose a cut for your application

A shellac cut describes the ratio of shellac flakes to alcohol. The author adjusts the strength to suit his tools. His reseller usually recommends a 3-pound cut for spray equipment. A 2-pound cut can be brushed on, but he finds it messier, which can discourage new users.

He prefers a 1-pound cut because its thinner coats are easier to apply. When he uses a rubber, he says it leaves no residue; brushing may leave some, depending on how much finish is loaded onto the brush. Any residue is small beside what he gets with a 2-pound cut. That makes the lighter mix his choice when he wants more control during application.

For one bookshelf, he makes about 200 ml of shellac. A clock generally takes half that amount or less. These are the quantities he uses for his own projects, so the amount needed will depend on the piece and the way you apply the finish.

Mixing the batch

For his 1-pound cut, the author uses approximately 24 g of shellac flakes to 200 ml of alcohol. A coffee grinder speeds up breaking down the flakes, and a laboratory mixer stirs the mixture continuously. He says it’s ready within two hours, but usually mixes it at the end of the day and leaves it overnight.

His mixer handles up to a 1.5-pound cut. At 2 pounds it struggles, and it won’t stir a stronger mixture. That limit matters if you’re considering the same kind of equipment: a mixer that suits his thinner batches may not manage a denser cut.

That little jar will cover the entire bookcasse and all parts

Pick alcohol that dissolves cleanly

Alcohol choice affects the mix. The author uses denatured alcohol, which is ethanol made undrinkable by adding toxic or unpleasant-tasting chemicals. If pure ethanol without denaturing additives is available, he considers it the cleanest option.

He advises against isopropyl alcohol because it dissolves the flakes but evaporates more slowly than ethanol, and says he won’t use it again. Mineral spirits, turpentine and ordinary lacquer thinner won’t work for this purpose. He recommends alcohol close to pure, preferably 95% or higher, with very little water.

Moisture can cloud shellac and interfere with the finish, leaving a gummy mixture that may not dry or cure properly on the wood. To reduce the chance of contamination, he puts the lid back on promptly and doesn’t leave the alcohol open on the bench. Keeping the container closed is a small step that helps protect the batch.

Match the brush to the piece

Soft squirrel-hair brushes are one option. Their fine, tapered hairs can release shellac evenly, while the brush holds more finish than its delicate feel might suggest. The author says they can produce a smooth coat with few brush marks, provided the user loads and applies the finish well; a good brush can’t make up for poor technique.

He owns a Gramercy squirrel-hair brush and reserves it for larger work such as the bookshelf. The brushes are sold by Tools for Working Wood. He notes that shipping costs and currency conversion make them less appealing to buyers outside the United States.

For most of his work, he reaches for a smaller goat-hair brush recommended by Paul Sellers. It’s easier for him to clean and hang up to dry in the workshop. The author’s setup offers a practical way to approach a large piece: prepare a manageable, relatively thin batch, keep moisture out, and choose a brush whose size and handling suit the job.

Source: The Lost Scrolls of Handwork · journeymansjournel.wordpress.com

Pairs well with